1 6
Hyte  |  رمز المنتج (SKU): 511606

HYTE X50 ATX Case with Mesh Side Panel - White

39.0 KD

Delivery and Shipping

خيارات التوصيل المتاحة لتلبية احتياجاتكم:

  • التوصيل ثاني يوم عمل: 1 د.ك للطلبات الاقل من 25 دينار, مجاناً للطلبات الاعلى
  • التوصيل في نفس اليوم: 1.9 د.ك
  • التوصيل السريع (خلال 90–180 دقيقة): 2.9 د.ك
    متاح للطلبات المقدمة قبل الساعة 08:00 مساءً
  • التوصيل الفائق السرعة (خلال 30–90 دقيقة): 3.9 د.ك
    متاح للطلبات المقدمة قبل الساعة 08:00 مساءً
  • مناطق علي صباح السالم (أم الهيمان)، صباح الأحمد، والمطلاع: 5 د.ك
  • البطاقات الرقمية: يتم تسليمها مجانًا مباشرة عبر الرسائل النصية (SMS)

مواعيد التوصيل من الساعة 11:00 صباحًا حتى 08:00 مساءً (يوم الجمعة بدءًا من الساعة 05:00 عصراً).

الطلبات المقدمة بعد الساعة 08:00 مساءً سيتم توصيلها في اليوم التالي.

يرجى ملاحظة أن سياسات وأسعار التوصيل قابلة للتغيير.

معلومات العناية

في ليفل أب، نحن ملتزمون بتوفير أفضل تجربة لعشاق الألعاب. نقدم منتجات عالية الجودة تلبي جميع احتياجاتك في عالم الألعاب. لضمان الاستدامة والأداء المثالي، يرجى اتباع تعليمات العناية المرفقة مع كل منتج. إذا كان لديك أي أسئلة أو تحتاج إلى مساعدة، فإن فريقنا دائمًا جاهز لمساعدتك!

الدفع والأمان

طرق الدفع

  • Apple Pay
  • Mastercard
  • Visa

تتم معالجة معلومات الدفع الخاصة بك بشكل آمن. نحن لا نقوم بتخزين تفاصيل بطاقة الائتمان ولا يمكننا الوصول إلى معلومات بطاقتك الائتمانية.

HYTE X50 Air ATX Mid-Tower Case with Mesh Side Panel - Snow White is a modern performance-focused PC case designed to balance distinctive styling, strong airflow, and flexible hardware support. The X50 Air uses a full-coverage micro-mesh panel as a low-resistance intake surface, while its patent-pending louvered blade ventilation helps reduce exhaust impedance and reinforce chassis rigidity. Cold-Floor Cooling directs fresh air toward the graphics card through support for up to three extra-thick 120mm bottom fans. Inside, the structural PSU canopy helps organize cables with strategically placed tie-down points and included Velcro straps. With support for E-ATX, ATX, Micro-ATX, and Mini-ITX motherboards, graphics cards up to 430mm, CPU coolers up to 170mm, and radiators up to 360mm, the Snow White X50 Air is built for high-performance gaming and workstation systems.


Key Features

  1. Full-coverage micro-mesh: The mesh side panel serves as a low-pressure, low-resistance air intake to support cooler temperatures and lower noise levels.
  2. Patent-pending louvered blade ventilation: The ventilation design slices through hot exhaust air while adding structural reinforcement to the chassis.
  3. Cold-Floor Cooling: Bottom fan support allows up to three 120mm extra-thick fans to send direct airflow toward the graphics card.
  4. Structural PSU canopy: A dedicated canopy helps conceal and organize power-supply cabling, with carefully positioned tie-down points and included Velcro straps inside and outside the chassis.
  5. Multi-dimensional design: Steel, ABS, and carefully shaped internal and external surfaces create a clean, refined case profile with a distinctive HYTE aesthetic.
  6. Broad motherboard support: Install E-ATX boards up to 10.6 inches, ATX, Micro-ATX, or Mini-ITX motherboards.
  7. Large graphics-card clearance: The case supports GPUs up to 430mm long and 160mm high for high-performance builds.
  8. Flexible cooling layout: Support includes front and side 120mm fans, front 140mm fans, bottom extra-thick 120mm fans, and a rear 120mm fan.
  9. 360mm radiator support: Install radiators up to 360mm at the side or front, with side thickness up to 70mm and front thickness up to 105mm.
  10. Ergonomic front I/O: Connect modern devices through USB-C, USB-A, and a 3.5mm audio combo jack, with a tactile mechanical power switch featuring LED illumination.
  11. Storage flexibility: The internal layout supports two 2.5-inch drives and one 3.5-inch drive.
  12. Clean snow-white finish: The Snow White colorway gives the case a bright, minimalist appearance for themed or high-end desktop builds.


Technical Specifications

General and Design
Model X50 Air
Internal Model CS-HYTE-X50A-WW
Form Factor ATX Mid-Tower
Volume 63L
Color Snow White
Chassis Materials 1mm thick steel and ABS
Side Panel Full-coverage micro-mesh
Dimensions and Hardware Support
Case Dimensions 485mm (H) × 510mm (L) × 255mm (W)
Motherboard Support E-ATX up to 10.6 inches, ATX, Micro-ATX, Mini-ITX
Power Supply Clearance Up to 223mm
GPU Support Up to 430mm length and 160mm height
Maximum CPU Cooler Height 170mm
Expansion Slots 7 horizontal full-size slots
Storage Support 2 × 2.5-inch drives, 1 × 3.5-inch drive
Fan and Radiator Support
Side Fan Support 3 × 120mm
Front Fan Support 3 × 120mm / 3 × 140mm
Bottom Fan Support 3 × 120mm up to 32mm thick
Rear Fan Support 1 × 120mm
Side Radiator Support Up to 360mm long and 70mm thick
Front Radiator Support Up to 360mm long and 105mm thick
Rear Radiator Support 120mm
Front I/O and Features
Audio I/O 3.5mm combo jack
USB I/O 1 × USB 3.2 Gen 2×2 Type-C, 2 × USB 3.2 Gen 1×1 Type-A
Power Switch Tactile mechanical power switch with LED
Dust Filters Bottom magnetic dust filter
Feet Contemporary feet
Cable Management Structural PSU canopy, tie-down points, and included Velcro straps
Back to top
{ direction: rtl; }